Vertical / Tilt Alarm

Breadcrumbs: Navigation > Lone worker > Lone worker template > Manage > Vertical Vertical alarm If enabled, the detection of the vertical position for the lone worker alert is active. Event Event whi…

Updated

Breadcrumbs: Navigation > Lone worker > Lone worker template > Manage > Vertical

Vertical alarm

If enabled, the detection of the vertical position for the lone worker alert is active.

Event

Event which will be activated in case the "vertical position" alert is triggered.

Uncritical position - deviation from vertical (Degree)

The max. deviation from the vertical position which is accepted.

E.g., if 45 is defined as uncritical position, any deviation greater than 45 degrees will be considered as "critical position".

Timeframe in critical position (Sec.)

Defines for how long the device is allowed to be in the "critical position" before the lone worker alert is triggered.

Message

This text is available in the lone worker alert event and can be accessed using the ~message~ placeholder.

Pre-Alarm warning message

This text is shown to the lone worker when the pre-alarm is triggered

Sensor testing instruction vertical

Instruction text which is shown to the user when executing the sensor test for "vertical position".

Note: This field is not available during creation of the template. It only becomes visible when editing it.

Sensor testing instruction horizontal

Instruction text which is shown to the user when executing the sensor test for "horizontal position".

Note: This field is not available during creation of the template. It only becomes visible when editing it.

Lone Worker Settings

No Moving Alarm

Contact